But taking measurements myself the minimum seat is 90cm from the floor, and maximum 110cm. There is no official sizing, or geometry chart with which to measure up against. To put that in context, it's double that of the Tern GSD and Mycle Cargo bikes.Īs with all cargo bikes, the Raleigh Stride 2 eCargo bike comes in one size only. A total (claimed) bike weight of 60kilos/ 132lbs is testament to that fact.

Making a bike from high tensile steel will certainly make it very strong and durable, but it certainly won't make it light. While this design allows for a huge capacity for cargo, and a rider weight of 100kilos/220lbs, it also means that the bike has to be strong enough to withstand these loads. Out back is an additional rack, which can also be set up for carrying more cargo, be it a child seat, basket or panniers, which has a maximum weight of 25kilos/55lbs (although in theory this should be to be balanced out to a maximum of 80kg/176lbs across front and rear loads). Mountain bikes with 26 inch, 27.5 inch and 29 inch wheelsare available in the same frame sizes.In between the handlebars and front wheel, there's a steering link which transfers the movement of the bars along what is effectively a long pole to the the front wheel.Ī robust large polystyrene tub, which has a load capacity of 80kilos/ 176lbs, is located in the middle of the gap, which is ringed securely in place by framework. Your optimal frame size is independent of the wheel size. For this reason, the seating tube – and so also the frame size – is somewhat shorter. Mountain bikes are generally designed to be more comfortable. The measurement you will use depends on which measure is used for the bike, or rather which standard applies to the new bike.įrame size guide for mountain bikes (MTBs)

Center-to-Top (C-T) is measured from the middle of the bottom bracket, but the upper endpoint is at the top of the seat tube.li>.

Center-to-Center (C-C) is the distance from the middle of the bottom bracket, that is where the crankset is attached to the bike, up to the intersection of the seat tube and the top tube.

The real question is, how would you prefer to measure the bike, since there are two standards: If you have no information about the size of your bike frame, all you need is a good, old-fashioned tape measure and you can measure it yourself.

It usually also printed on the frame itself. Modern bikes are sold with a large amount of information, which should include the exact measurements of the frame. It is usually not necessary for you to measure the frame size yourself. Tip: To ensure you get the most accurate result possible, it is useful to get a friend to help. Your inside leg is the distance between the floor and the upper edge of the level. The level must stay horizontal while measuring. Holding the level with both hands (in front and behind your body), raise it up until it’s snug against your crotch, like you are sitting on a saddle. Hold a spirit level or similar (a book, for example) between your legs. To take this measurement you should stand with bare feet, upright with your back against a wall.

Bike geometry calculator